Extraordinary occasions call for a touch of luxury. A new and elaborate decoration process refines SCHÖNWALD porcelain with high-gloss, metallic surfaces. This provides an extravagant basis for high-end decorations that are sure to cause a stir.
Monthly Archives: April 2015
– For vertical lifting and transporting various materials as steel, wood, plastic, concrete, marble etc. which have parallel sides
– The clamp is locked in the open position. To perform lifting, the operator must activate the handle and hold it up while the force on the lifting eye is going upwards. When laying down the load, the clamp automatically unlocks itself to open.
– The pads are covered with special plastic to avoid damaging the material.
For vertical lifting of tubes, bundles of tubes and solid round material.
– For horizontal transport of rail profiles.
– Terrier TRC is equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
– The clamp is locked in closed as well in open position.
– Other capacities or other profile dimensions are available upon request.
– Equipped with an extra hardened pivot and cam for lifting and transporting steel plates with a hardness of max. 50 HRC. (for Hardox 400 and 500).
– Please ask for special specifications.
– Other capacity and jaw-opening available upon request.
TVK
– For safe lifting and transporting of steel (oil) drums.
– With automatic locking mechanism.
– The TVK steel drum clamps are supplied with an original certificate.
– Terrier TVK steel drum clamps can be used in pairs or singles.
TVKH
– For lifting, handling and transporting of (oil)drums, wherethe drums have to stay in a horizontal position.
– Capacity 0.6 tons.
TBC
– For vertical lifting and transporting of concrete pipe and wells.
– Terrier TBC clamps must always be used in pairs or per three clamps.
– Higher capacities or other jaw opening available upon request.
– The moveable side is fitted with a “special” high pressure plastic surface.
TBCA
A min. 50 mm/max. 220 mm.
Adjustable in steps of 25 mm.
– For horizontal lifting and transporting of steel and concrete pipes.
– Compact shape and relatively low unit weight with a high lifting capacity.
– The surface is equipped with “special” plastic.
– Terrier TPH will be delivered per pair.
– Plastic cover replacement parts are available and easy to change.
– For use as a temporary lifting point in any room where HP-profile is being used, such as sectional ship parts and ship engine rooms.
– The clamp is used for HP-100 to HP-240.
– Universal screw clamp for vertical and horizontal lifting and transporting of a large variety of steel structures.
– The TSCC screw clamp is fitted with a moveable cam on the thread spindle which provides a powerful clamping force on the workpiece.
– The articulated lifting eye ensures an effective clamping force in every position.
– For lifting and transporting of steel beams and structures.
– Can also be attached upside down and be used as a (temporary) lifting point.
– Has equal opening and closing of both jaws for simple and quick assembly.
– Lifting capacity and jaw opening are clearly engraved in the body.
FVS/FSVS
FSVSU
FBK
– For lifting and transporting steel beams, profiles and structures where the load must stay in position.
– The special shape of the lifting shackle, places the centre of the gravity of the beam beneath the lifting shackle, this maintains the equilibrium of the beam once it has been lifted and keeps the flanges vertical so that the beam can easily be stacked or positioned.
– Recommend for transporting and stacking of steelbeams (e.g. sawing of steelbeams, stacking of steelbeams and building of steel construction).
– Lifting capacity and jaw-opening are clearly engraved in the body.
TOBK
– For lifting and transporting steel beams, profiles and structures .
– Because of the safety mechanism, the clamp is locked in closed as well as in open position.
– The clamp is suitable to lift steel beams on the flange as well as on the upper ends of the beam.
– The TNMH lifting clamp is suited for transporting and lifting objects with a fragile surface. Like stainless steel, wood panels, aluminium etc.
– The jaw and cam is covered with a high quality pressure resistant fabric.
– Terrier TNMH horizontal lifting clamps must always be used in pairs (or multiples thereof).
– Terrier TNMH clamps are available with a capacity from 1000 kg per pair to 6000 lbs per pair.
– Terrier FHX-V Lifting clamp has a spring attached to the cam assembly allowing the clamp to close on any desired spot.
– The spring allows one operator to place the clamps and guide the hoist
– Terrier FHX-V horizontal lifting clamps must always be used in pairs (or multiples thereof).
– Terrier FHX-V clamps are available with a capacity from 1000 kg per pair to 6000 lbs per pair.
– For lifting, handling and transporting of banded/secured stacks and single steel plates
– The Terrier THSK horizontal lifting clamps must always be used in pairs (or multiples thereof).
– Capacity 1.5 tons per pair up to 9 tons per pair.
– Opening 3 – 180 mm, 3 – 300 mm and 3 – 420 mm.
– For lifting and transporting of thin sheets that deflect when being lifted.
– Compact shape and relatively low unit weights with a high lifting capacity.
– Terrier TDH horizontal lifting clamps must always be used in pairs (or multiples thereof).
Specifications are subject to change.
– For vertical lifting and transporting of structures where a square tube is used as a frame. For example mobile units etc.
– If the clamp is being loaded , the cams will pull out sideways and will grip into the sides of the square tube.
– Because of the compact design of the clamp, the clamp will not use more space than the dimensions of the square tube.
– The clamp is equipped with an universal lifting eye.
– Lifting capacity and jaw opening are clearly engraved in the body.
– For vertical lifting and transporting of (thin) sheet metal.
– The TCK clamp is equipped with a special pivot, the special pivot will adapt itself to the load of the clamp. This will generate more friction which eliminates the chance of slipping loads.
– The TCK lifting clamp is equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
– The clamp is locked in closed as well as in open position.
– Lifting capacity and jaw opening is clearly engraved in the body.
– Terrier TNMK is a NON-MARKING clamp with 2 special synthetic pads. The clamp can be used for lifting, handling and transporting (stainless) steel, aluminum, wood and marble plates and will not leave any marks.
– The clamp is locked in closed as well as in open position.
TNMK
TNMKA
A min. 1 mm/max. 180 mm
B min. 220 mm/max. 340 mm
Adjustable in steps of 20 mm
TSHPU is a follow-up of the TSHP-1 and TSHP-1.5. It is especially designed for lifting, handling and transporting of HP-profile and construction with HP-profile.
– For lifting and transporting of Holland-Profile (HP) and structures with HP-profile.
– Also useful as a “big-jaw” opening clamp.
– Standard with 3 pivots for extra powerful clamping force.
– The Terrier TSHP lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
– The clamp is locked in closed as well as in open position.
– For lifting and transporting of stainless steel plates and structures a TSU-R lifting clamp is available.
– Pivot and cam are made of stainless steel.
– Body and lock lever are nickel plated to prevent corrosion due to carbon contamination.
– Only 1 clamp needed for different kind of jobs.
– Also the same clamp can be used if a big jaw opening is necessary.
– For lifting and transporting of steel plates and structures from all positions.
– Jaw opening from 0 – 95 mm. Adjustable by steps of 30 mm.
– Capacity 3000 kg
– Strong and lightweight construction.
– For lifting and transporting steel plates and structures from all positions (horizontal, vertical and sidelong).
– Articulated lifting shackle.
– Terrier TSU /STSU lifting clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
– The clamp is locked in closed as well as in open position.
– Lifting capacity and jaw openings are clearly engraved in the body.
– STSU type clamps are supplied with a larger jaw opening.
– Minimum W.L.L. is 10 % of the maximum W.L.L.
The most advanced Electronic Shelf Labelling Technology
The current line-up goes from 1.6 to 12.2 inches, with displays in black, white, red or black, white, yellow.
Proven sales booster and essential part of the efficient and connected store, VUSION Labels have unique and
key features to digitalize physical retail:
> High resolution color e-Paper displays
> Easylock Antitheft Protection System
> Active NFC
> Instant LED Flashing (7 colors)
> IoT ultra-low-power communications infrastructure (5-year battery lifetime)
> Instant data transfer
> Super-wide viewing angle (near 180°)
For transporting large volumes of dirty and clean laundry, which saves staff unnecessary journeys. The fold-out container shelves can be easily handled, transforming the shelved laundry container AL into a trolley for collecting used laundry in next to no time.
Design
Sturdy construction made of anodised aluminium. Surrounding plastic bumper. Roll-down front panel made of plastic as standard. Two 90° hinged shelves.
Horizontal position:
For clean laundry.
Vertical position:
For dirty laundry.
Castors
4 swivel castors, incl. 2 with brake.
Ideally dimensioned and stable side table for hotel rooms and restaurants; foldable sides for narrow passages. Also available on request with integrated hot box for keeping meals hot.
With hinged side parts
Can be nested to save space
Tray frame for hot box, folding
With 2 brakes as standard, diagonally placed
Electric hot box and standard hot box
With 3 shelves, both hot box models are ideal for ensuring meals stay hot on their way to guest rooms.
Standard equipment
Steel-tube design with oval table top in wood finish with tough, sealed edge and fold-down side parts. Fold-out chrome-plated rack for the hot box. The table tops can be locked in a vertical position for storage and transport and the RSVC-Comfort can be nested to save space.
Shelf unit
Mobile, for storing up to 6 hot boxes
Finish
Plastic powder coating in slate grey, RAL 9005.
Castor wheels
4 swivel castors, incl. 2 with brakes, rubber tread, castor wheel diameter 125mm
Design
Stylish steel tube construction, available with optional lockable lid. Chassis with bumper profile all around and four integrated plastic deflector rings. Two fixed shelves and two height-adjustable shelves with wire bars to prevent slipping, both in wood effect. Drawer made from sheet steel available as an option. Front side with lockable plastic rolling front.
Surface
Plastic powder coated in titanium 7084.
A reliable partner for minibar service – with clearly structured divisions for efficient filling of bottles and small items.
Lockable roll-down panel
Height-adjustable, removable shelves with wire bar – railing to prevent slipping
The 5th castor allows it to turn on the spot
Presorting of laundry into two or three modules with coloured bags. For both fabric and plastic bags – these nifty trolleys make sure that all laundry is correctly sorted for washing.
1-3 modules with bags in 3 colours
Error-free pre-sorting
Robust rubber rings for securing bags
Compact, useful and a must in all hotel rooms. This folding case stand means that suitcases no longer have to be placed on freshly made beds.
An indispensable feature of every guest room
Rear bar to prevent slipping
Folding mechanism for space-saving storage
Protects your hotel interior
The high bar and the extension of the rear feet ensure the necessary distance is kept from the wall to avoid damage.
Standard features
Easy-to-handle tube frame with bar at back to prevent slipping. Folding mechanism for space-saving storage. Heavy-duty black belts prevent damage to cases.
Finish
Choice of high-gloss chrome-plated, hammer finish or flash gold-plating.
The hotel-max. S and the hotel-max. L do their work as a constant, “invisible” companion to the chambermaid and thus prevent impairment of the overall impression given by hotels with an upmarket ambience.
“Invisible” assistants for disturbance-free housekeeping
For hotels with an upmarket ambience, such as boutique hotels or resorts
Compact, manoeuvrable and stylish
A slender outline that makes for an elegant feature in any hotel environment. With a pared-down shape that can be nested to save space and is mounted on castors for maximum mobility.
Can be nested to save space
Easy to move on castors, brakes optionally available
With practical hat rack
The practical features of the Premium Basic chambermaid trolley offer the usual Wanzl quality even for tighter budgets. Platinum white finish
Functional and cost-effective
With integrated deflectors
to protect your fixtures
Extremely sturdy steel construction
Folding side sections for space-saving storage
Total flexibility is achievable with the Akcots wire shelving and security cages. All shelf levels are fully height-adjustable, and accessories can be purchase to convert the shelvings into mobile units. Available in stainless steel and epoxy surface treatment to ensure long life span and usage.
WS2-8HC
8 Bays (2 Bays Deep)
• 1 Row Single Static
• 1 Row Single
Movable
• 1 Row Double
Movable
W1830 L2386 H2195
Walkway: 762L
WS1-4HC
4 Bays (1 Bay Deep)
• 1 Row Single Static
• 1 Row Single
Movable
• 1 Row Double
Movable
W915 L2386 H2195
Walkway: 762L
An eye-catching design for check-in
Excellent manoeuvrability, optional locking brake
Integrated coat rail
Space-saving luggage trolley, robust design
High-quality surfaces and durable carpet lining
Optional locking brake
Prevents the trolley accidentally rolling away
Optional brake. An ideal addition to make the GS-Lobby secure on inclines.
